• Contact Us
Holley Supercharger XP Carburetor - Draw-Thru

Holley Supercharger XP Carburetor - Draw-Thru

Price: $907.95

4150 HP 650CFM - ALUMINUM

600 CFM - 4150 - Mechanical Secondaries - Shiny - Gasoline

Overview
By popular demand, Holley is expanding the draw-thru supercharger carburetor line to now include the XP series. Like the existing HP line, these are available in 600, 750, and 950 CFM flow rates and standard polished with black accents. The feature-laden XP includes a contoured venturi inlet for balanced air flow, screw in air bleeds for precision tuning capabilities, high flow billet metering blocks, billet base plate, and Dominator style fuel bowls which allow plumbing from either side. Supercharger XP carburetors also have a unique capability that allows their power valves to reference the intake manifold vacuum below the supercharger. This allows the power valve to operate as it should, based off intake manifold vacuum. A power valve provides further enrichment to the main metering system under load (low vacuum) conditions. Holley XP carburetors are the standard for square bore race carburetors. Race-Ready out of the box!

Features:

  • Tumble polished shiny finish for good looks
  • Chevrolet small block 2x4, 671 blower calibration
  • Contoured venturri inlet offers balanced airflow for increased horsepower
  • Screw in air bleeds for precision tuning capabilities
  • Dual 50cc accelerator pumps for additional fuel under initial acceleration
  • Dual feed fuel inlets for constant high volume fuel delivery
  • 4 corner idle allows you to precisely control your idle system
  • Mechanical Secondaries for perfect off the line launches
  • Boost referenced power valve for proper enrichment under acceleration
  • Throttle lever cut off for clearance on a sideways application
  • 100% wet-flow tested by Holley technicians to assure it arrives ready to run!

About Holley

Holley Performance Brands is the undisputed leader in carburetors, fuel pumps, fuel injection, intake manifolds, fuel injection, and fuel systems.

Specs
Barrel Quantity 4
Barrels 4
Body Color Polished
Body Finish Polished
Booster Straight
Booster Design Straight
Brand Holley
Carburetor Material Aluminum
Carburetor Use Performance and Race
CFM 600
Choke None
Circuit 2
Condition New
Cubic Feet Per Minute Rating 600
Emission Code 3
Finish Shiny
Flange Type Square/4150
Fuel Gasoline
Fuel Inlet Dual
Grade Type Performance
Linkage Attached Yes
Marine Approved No
Marine Use No
Material Aluminum
Model XP-Series
Mounting Hole Quantity 4
Primary Jet Diameter 74
Primary Main Jet 74
Primary Power Valve 10.5
Primary Pump Nozzle Size 31
Product Type Carburetor
Sale Category Carburetors and Components
Secondaries Mechanical
Secondary Main Jet 74
Secondary Power Valve 10.5
Secondary Pump Nozzle Size 31
Spacer Included No
Supercharged Application Yes
System Type Draw Thru
Throttle Bore 1.563 inch
Venturii Size 1.250 inch
Warranty Limited 90 Day
UPC 090127144473
Part Number 0-80575SA
Service Parts
3

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.

The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle
Tech Resources
 
This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.

SHIPPING: Most shipments via UPS ground or USPS priority service. 3-Day Select, 2nd Day Air, and Next Day Air are also available at an additional charge. Customer pays all freight charges. All Shipping on Large Items such as, Complete A/C kits, Front End Components, Serpentine kits, etc. will be subject to Standard UPS Ground Daily Rates unless specified otherwise. Handling Fees are non-refundable. International customers are responsible for ALL duties/taxes on international shipments.

RETURNS: All returns must have an RGA (Return Goods Authorization) number on the outside of the box and be returned within 30 days or they will be refused. Call (864) 848-0601 to obtain an RGA number. All returns are subject to a 15% restocking fee—resalable items only. NO RETURNS AT ANY SHOWS—NO EXCEPTION! If you paint it, mount it, install it—you bought it. Check your order upon receipt, shortages will not be honored after 7 days. Returns must have freight pre-paid. COD returns will be refused. NO RETURN ON SPECIAL ORDERS OR ELECTRICAL ITEMS. (Keyless entry, wiper motor, etc) Are not refundable unless defective.

Please visit our Company Policies page for more information or feel free to contact us with any questions!

No reviews currently exist for this item.

Rating is required
Email is required and should be a valid email address
Name is required
Title is required
Review is required

Your product review has been submitted for review.

Vehicle Search

Need Help?

Our team is ready to assist with all of your watch needs.