0
Features:
- Plug and Play with 1987-1993 Fox Body Mustangs, powered by the factory 302ci Small Block Ford, with the stock TFI Distributor
- This Kit contains an ECU Mounting Bracket - TFI Ignition Adapter - a Fox Body specific engine main harness, as well as MAT and CTS sensors
- Includes EV1 Injector Harness, which will directly replace the old, brittle, factory Ford Injector harness
- High Impedance Injector Drivers will safely power most Stock injectors, and Holley EFI Injectors.
- All of the new Terminator X systems utilize the Bosch LSU 4.9 wideband to relay AFR information to the ECU for accurate reading and precise tuning control.
- Built in 1bar MAP Sensor, vacuum hose adapters included (1/8th – ¼ and 3/16ths)
- Boosted applications, you can disable the internal MAP sensor, and utilize an external MAP Sensor, the harness comes with the connector terminated, making the install
- Plug and plug ignition capability with Dual Sync and HyperSpark Distributors, adapter 558-323 required for HyperSpark Distributors.
- 4 Inputs – 12v, Ground, 5v, and Frequency, for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake
- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties
- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR
- Advanced Tables – 4x 1D Tables, 1x 1D per Gear Table, 4x 2D Tables, 1x 2D per Gear Table, can be used for any custom tables you can dream up, such as Flex Fuel Sensor Offset Table, or a custom fuel or oil pressure safety!
- On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal –Cam Signal. Allow you to identify any Critical engine issues at a glance
- The included 3.5" Touchscreen Handheld contains a calibration wizard, that allows you to quickly build a base tune for any domestic V8 engine. Additionally the handheld provides internal data-logging and a fully customizable gauge display.
- Additionally the handheld provides internal data-logging and a fully customizable gauge display.
- 4 Outputs – Ground, PWM - , for accessories such as, fans, boost control, nitrous control, IAC Kit, and More
- On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal, allowing you to identify any Critical engine issues at a glance
- The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDS must face up!
- Plug and play compatible with more Holley EFI accessories such as, analog style gauges, shift lights, various modules, and coming soon, 12.3" digital dash support!
- Free EFI Tuning Software for complete control of your Terminator X power plant
| Accelerometer Support | Yes |
|---|---|
| Boost Control | Yes |
| Brand | Holley EFI |
| CAN-BUS Support | Yes |
| Category | Air and Fuel Delivery |
| Fuel Injection - EFI | |
| Coil Per Cylinder Ignition Support | Yes |
| Datalogging Support | Yes |
| Distributor Included | No |
| Dry Nitrous Control | Yes |
| e85 Support | Yes |
| EGT Support | Yes |
| Emission Code | 4 |
| Engine | Ford Small Block |
| Forced Induction Support | Yes |
| Fuel Filter Included | No |
| Fuel Hose Included | No |
| Fuel Injectors Included | No |
| Fuel Pressure Regulator Included | No |
| Fuel Pump Included | No |
| Grade Type | Performance |
| Handheld Included | Yes |
| Idle Air Control Motor Included | No |
| Ignition Timing Control | Yes |
| Ignition Type | Ford TFI |
| Individual Cylinder Fuel Corrections | Yes |
| Injector Connector | Jetronic / Minitimer (Bosch) |
| Intake Manifold Included | No |
| Knock Retard Support | Yes |
| MAP Sensor | 1bar |
| Mounting Hardware Included | No |
| Multi-Stage Nitrous Control | Yes |
| Product Type | Terminator X Ford MPFI Kit |
| Progressive Nitrous Control | Yes |
| Self-Tuning | Yes |
| Throttle Position Sensor Included | No |
| User-Tuneable | Yes |
| Wet Nitrous Control | Yes |
| UPC | 090127074343 |
| Part Number | 550-937F |
Orders will be shipped either through Federal Express or UPS. All shipments will include tracking information. Visner Engine Development, LLC can only ship to valid addresses, we cannot ship to P.O. Boxes or rented private mailboxes. The customer is responsible for any loss or damage after the package(s) leaves the care of Federal Express or UPS.
The receipt by you of an order confirmation via e-mail does not constitute Visner Engine Development, LLC 's acceptance of an order. Prior to Visner Engine Development, LLC 's acceptance of an order, payment verification is required. Visner Engine Development, LLC reserves the right at any time after receipt of your order to decline your order if payment does not clear and/or is not approved.
We want our customers to be completely satisfied with their purchase from Visner Engine Development, LLC . If you are not completely satisfied, return the new/unused Product(s) and/or Part(s) in the original box(s) prepaid within 14 days of the purchase date (No returns on Custom Orders, only on stocked items). We do not accept returns on any Product(s) and/or Part(s) that have been used and/or installed on an engine and ran. We also do not accept returns on any Product(s) and/or related Part(s) that have been modified and/or altered in any way after leaving Visner Engine Development, LLC .
Please visit our Warranty, Shipping & Returns for more information or feel free to contact us with any questions!
No reviews currently exist for this item.