0
 |  |  |
Features:
- For GM LS1/LS6 engines with 24x crank reluctor, with EV6 Injectors.
- Real-time fuel map learn takes the guess work out of tuning your base fuel table
- High Impedance Injector Drivers will safely power most stock LS injectors, and Holley EFI Injectors
- Injector support chart provided in the instructions (will not control Low Impedance Injectors)
- All of the new Terminator X systems utilize the Bosch LSU 4.9 wideband to relay AFR information to the ECU for accurate reading and precise tuning control
- On-board 1bar MAP sensor is perfect for N/A or Nitrous engine combos. If your combination requires a 2+Bar, we recommend GM 12592525 and our adapter part number 558-416
- MAP Sensor vacuum hose adapters (1/8th – ¼ and 3/16ths)
- 4 Inputs – 12v, Ground, 5v, and Frequency for things such as additional pressure sensors, activation triggers for nitrous activation, or a trans brake
- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties
- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR
- Advanced Tables – 4x 1D Tables, 1x 1D per Gear Table, 4x 2D Tables, 1x 2D per Gear Table can be used for any custom tables you can dream up, such as Flex Fuel Sensor Offset Table, or a custom fuel or oil pressure safety
- On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal –Cam Signal. Allows you to identify any Critical engine issues at a glance
- The included 3.5" Touchscreen Handheld contains a calibration wizard, that allows you to quickly build a base tune for any LS engine. Additionally the handheld provides internal data-logging and a fully customizable gauge display
- The compact ECU size allows you to mount it virtually anywhere, remember diagnostic LEDS must face up
- Plug and play compatible with more Holley EFI accessories such as analog style gauges, shift lights, various modules, and coming soon, 12.3" digital dash support
- Free EFI Tuning Software for complete control of your Terminator X power plant
- Includes: 24x LS Engine Main Harness - EV6 Injector Harness - Terminator X ECU - ECU Main Power Harness - Bosch LSU 4.9 Wideband Oxygen Sensor - Input/Output Harness - and assorted vacuum adapters
| Accelerometer Support | Yes |
|---|---|
| Boost Control | Yes |
| Brand | Holley EFI |
| CAN-BUS Support | Yes |
| Category | Fuel Injection - EFI |
| Coil Per Cylinder Ignition Support | Yes |
| Crank Reluctor | 24x |
| Datalogging Support | Yes |
| Distributor Included | No |
| Drive-By-Wire | No |
| Dry Nitrous Control | Yes |
| e85 Support | Yes |
| EGT Support | Yes |
| Emission Code | 3 |
| Engine | GM LS1/LS2/LS6 |
| Forced Induction Support | Yes |
| Fuel Filter Included | No |
| Fuel Hose Included | No |
| Fuel Injectors Included | No |
| Fuel Pressure Regulator Included | No |
| Fuel Pump Included | No |
| Grade Type | Performance |
| Handheld Included | Yes |
| Idle Air Control Motor Included | No |
| Ignition Timing Control | Yes |
| Ignition Type | GM LS 24x |
| Individual Cylinder Fuel Corrections | Yes |
| Injector Connector | USCAR (EV6) |
| Intake Manifold Included | No |
| Knock Retard Support | Yes |
| MAP Sensor | 1bar |
| Mounting Hardware Included | No |
| Multi-Stage Nitrous Control | Yes |
| Product Type | EFI System |
| Progressive Nitrous Control | Yes |
| Self-Tuning | Yes |
| Terminator LS Options | Fuel, Spark |
| Throttle Position Sensor Included | No |
| Transmission | None |
| User-Tuneable | Yes |
| Wet Nitrous Control | Yes |
| UPC | 090127064290 |
| Part Number | 550-909 |
SHIPPING: Most shipments via UPS ground or USPS priority service. 3-Day Select, 2nd Day Air, and Next Day Air are also available at an additional charge. Customer pays all freight charges. All Shipping on Large Items such as, Complete A/C kits, Front End Components, Serpentine kits, etc. will be subject to Standard UPS Ground Daily Rates unless specified otherwise. Handling Fees are non-refundable. International customers are responsible for ALL duties/taxes on international shipments.
RETURNS: All returns must have an RGA (Return Goods Authorization) number on the outside of the box and be returned within 30 days or they will be refused. Call (864) 848-0601 to obtain an RGA number. All returns are subject to a 15% restocking fee—resalable items only. NO RETURNS AT ANY SHOWS—NO EXCEPTION! If you paint it, mount it, install it—you bought it. Check your order upon receipt, shortages will not be honored after 7 days. Returns must have freight pre-paid. COD returns will be refused. NO RETURN ON SPECIAL ORDERS OR ELECTRICAL ITEMS. (Keyless entry, wiper motor, etc) Are not refundable unless defective.
Please visit our Company Policies page for more information or feel free to contact us with any questions!
No reviews currently exist for this item.