0
LS THROTTLE BODY, 105MM W/TAPERED BORE
Features:
- TPS CLOCKER allows the TPS to be rotated back into the ECU's required idle voltage range. Modified engines no longer suffer from problems related to TPS voltage!
- IDLE BLEED allows adjustment of your idle without affecting throttle position or TPS voltages at idle!
- PCV PASSAGE VALVE closes to accommodate forced induction applications! No more plugging to block off PCV!
- OVERSIZED BORE compared to other LS throttle bodies
- PREMIUM BILLET BODY supports the high tolerance design and look your performance engine deserves!
- BLACK ANODIZED FINISH for superior corrosion resistance and serious good looks
- CRUISE CONTROL provision built in for cruise control cable
- CABLE DRIVEN APPLICATION
- Fits the following intake manifolds: Holley 105mm Hi-Ram, Fast™ LSXR & LSXRT, MSD® Atomic AirForce, Most other 102 through 105mm LS intakes using 4 bolt TBs
About Holley EFI
Find standalone EFI for LS, Coyote, Hemi and more at Holley.com. From engine swapping to managing up to 4000 horsepower, we have a solution for every project!
| Adjustable | Yes |
|---|---|
| Billet Color | Black |
| Bore Diameter | 105 MM |
| Brand | Holley EFI |
| Category | Air and Fuel Delivery |
| Emission Code | 8 |
| Fuel Injectors Included | No |
| Fuel System Type | EFI |
| Gasket Or Seal Included | No |
| Grade Type | Performance |
| Idle Air Control Motor Included | No |
| Material | Billet Aluminum |
| Mounting Hardware Included | No |
| Part Type | Fuel Injection Throttle Body |
| Product Type | Throttle Body |
| Sub Category | Fuel Injection System and Related Components |
| Throttle Body Finish | Black |
| Throttle Body Material | Billet Aluminum |
| Throttle Body Spacer Included | No |
| Throttle Bore | 105mm |
| Throttle Diameter (mm) | 105mm |
| Throttle Position Sensor Included | No |
| UPC | 090127686515 |
| Part Number | 112-581 |
This product is engineered to facilitate the installation of a later model, emissions friendly engine into a vintage / classic vehicle. Federal guidelines indicate that an engine swap is allowable if one or more of the following conditions apply:
- If there is a reasonable basis for knowing that emissions are not adversely affected as described in the EPA Tampering Policy dated November 23rd, 2020
- The resulting vehicle is identical (with regard to all emissions related parts, engine design parameters and engine calibrations) to a certified configuration of the same or newer model year as the vehicle chassis
- The vehicle is a uncontrolled vehicle - Vehicles that were manufactured before emission control regulations took effect are called uncontrolled vehicles. Aftermarket parts regulations and anti-tampering laws do not apply to these vehicles
- An EO legal engine swap kit is utilized (such as a GM EROD)
- The vehicle is being used for Competition Use Only - Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street
Consumers are responsible for complying with laws prohibiting tampering, and for ensuring that modified vehicles are operated in a manner that complies with applicable laws.
Motor vehicle emissions standards are intended to help achieve and maintain air quality goals that benefit human health and the environment. The U.S. Environmental Protection Agency, the California Air Resources Board, Environment Canada, and other regulatory agencies prohibit the operation of vehicles on public roads that violate applicable emissions standards. The alteration of certified production vehicles to modify, remove, or render inoperable emissions control hardware or software, known as "tampering" is prohibited by the U.S. Clean Air Act and other laws. Tampering with motor vehicles emissions control systems is punishable by substantial monetary penalties.
Holley is committed to performance parts that allow enthusiasts to modify their vehicles and meet emission requirements. The information provided here is intended to provide general guidance of interest to most consumers. This guidance may not apply to all vehicles or all situations. It is up to each consumer to evaluate his or her own situation and take the steps necessary to comply with applicable laws. The websites listed below have more information about regulations and policies pertaining to motor vehicle emissions. You should also check the regulations applicable to your local area.
CARB Website
https://ww3.arb.ca.gov/msprog/aftermkt/aftermkt.htm
SHIPPING: Most shipments via UPS ground or USPS priority service. 3-Day Select, 2nd Day Air, and Next Day Air are also available at an additional charge. Customer pays all freight charges. All Shipping on Large Items such as, Complete A/C kits, Front End Components, Serpentine kits, etc. will be subject to Standard UPS Ground Daily Rates unless specified otherwise. Handling Fees are non-refundable. International customers are responsible for ALL duties/taxes on international shipments.
RETURNS: All returns must have an RGA (Return Goods Authorization) number on the outside of the box and be returned within 30 days or they will be refused. Call (864) 848-0601 to obtain an RGA number. All returns are subject to a 15% restocking fee—resalable items only. NO RETURNS AT ANY SHOWS—NO EXCEPTION! If you paint it, mount it, install it—you bought it. Check your order upon receipt, shortages will not be honored after 7 days. Returns must have freight pre-paid. COD returns will be refused. NO RETURN ON SPECIAL ORDERS OR ELECTRICAL ITEMS. (Keyless entry, wiper motor, etc) Are not refundable unless defective.
Please visit our Company Policies page for more information or feel free to contact us with any questions!
No reviews currently exist for this item.